make WWAY your homepage  Become a fan on facebook  Follow us on twitter  Receive RSS Newsfeeds  MEMBERS: Register | Login

NTSB report explains Oak Island helicopter crash

READ MORE:

OAK ISLAND, NC (WWAY) -- Answers are emerging about what caused a helicopter to crash off of Oak Island last summer.

According to a recently-released report from the National Transportation Safety Board, a series of highly-skilled maneuvers sent the two-seat chopper plummeting toward the water.

On June 14, 2012, Mari Kajimoto and William Mistrot decided to fly a Robinson R-22 from Wilmington to Myrtle Beach. According to the report, after a preflight inspection, Kajimoto and Mistrot took off without filing a flight plan with air traffic controllers.

The report says Kajimoto, who was piloting the chopper, decided she wanted to perform an autorotation maneuver, which practices landing without power. Her co-pilot warned against it, because neither one of them had the experience. At about 600 feet and traveling about 75 knots, Kajimoto decided to do it anyway, the report says.

Immediately warning sirens sounded that the helicopter was losing power. Kajimoto tried to power out of trouble, but the 1,400-pound chopper rolled over and fell into the water near the Yaupon Pier.

A nearby boat immediately came to the rescue. Neither Kajimoto nor Mistrot were seriously hurt.

Kajimoto admitted to NTSB investigators that there was nothing wrong with the helicopter, and that the accident was her fault.

Disclaimer: Comments posted on this, or any story are opinions of those people posting them, and not the views or opinions of WWAY NewsChannel 3, its management or employees. You can view our comment policy here.

»

Reply

The content of this field is kept private and will not be shown publicly.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.

More information about formatting options

To prevent automated spam submissions leave this field empty.
CAPTCHA
Please re-enter the code shown in the image below.